PUBLICATIONS

PHD Thesis

Goodall W.R. (2005). New techniques in the characterization of complex gold ores (submitted, August 2005)

Papers

Cropp A.F., Goodall, W.R. and Bradshaw, D, J. (2013, under review). The influence of textural variation and gangue mineralogy on recovery of copper by flotation from porphyry ore: a review. GeoMet, October 2013, Brisbane Australia

Goodall W.R. (2012) “The use of QEMSCAN in practical gold deportment studies” Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), 121 (4) pp 199-204

Goodall, W.R. and Perkins, J.P. “Early stage metallurgical evaluation of a complex low-grade uranium project” ALTA Uranium conference proceedings 259-272

Goodall, W.R. (2008) “Characterisation of mineralogy and gold deportment for complex tailings deposits using QEMSCAN” Minerals Engineering (21) 518-523

Goodall, W.R. (2007) “The use of QEMSCAN in practical gold deportment studies” World Gold 07 Proceedings 221-228

Goodall, W.R. and Scales, P.J. (2007) “An overview of the advantages and disadvantages of the determination of gold mineralogy by automated mineralogy” Minerals Engineering 20 (5) 506-517

Goodall, W.R. Scales, P.J. and Ryan C.G. (2005) “Applications of PIXE and diagnostic leaching in the characterization of complex gold ores” Minerals Engineering 18 (10) 1010-1019

Butcher A, Cropp A, French D and Azzi M (2005) Source Characterisation of Atmospheric Particles Using Automated Scanning Microscopy (QEMSCAN®). 17th International Clean Air and Environment Conference, April, 2005, Hobart, Australia

Goodall, W.R. Scales, P.J. and Butcher, A.R. (2005) “The use of QEMSCAN and diagnostic leaching in the characterization of gold in complex ores” Minerals Engineering 18 (8) 877-886

Goodall, W.R. Leatham, J.D. and Scales, P.J. (2005) “A new method of determination of preg-robbing in gold ores” Minerals Engineering, 18 (12) 1135-1141

Butcher AR, French D, Cropp A, Gottlieb P, Wall T and Gupta R (2004) Advances In the Automated Measurement of Coal and Mineral Matter By QEMSCAN. Pittsburgh Coal Conference, Osaka, Japan

Butcher AR, Gottlieb P, Miller G, French D, Cropp A, Gupta R, Sharma A and Wall T (2003) Automated Measurement of Coal & Mineral Matter by QEMSCAN. 12th ICCS Meeting, Cairns, Australia, November 2003

White Papers

Cropp, A.F. and Goodall, W.R. (2013) “What is Process Mineralogy”. www.minassist.com.au – May 2013

Cropp, A.F. and Goodall, W.R. (2013) “What is Geometallurgy”. www.minassist.com.au – June 2013

Digital Books

Goodall W.R. and Cropp, A.F. (2013) “Integrating Mineralogy into Everyday Solutions”

Magazine Articles

Goodall (2013). Ask the Experts: How a better understanding of ore mineralogy can increase process efficiency and reduce operating costs in mining. Mining Magazine, March 2013

Goodall (2013 – contributing author). Midas Mission: Ideas and technologies to get the most out of the world’s gold deposits. Ed. John Chadwick. International Mining, May 2013

Goodall (2013 – contributing author). Heaps of New Technology: New ideas, chemicals and technologies in the heap leaching world. Ed. John Chadwick. International Mining, July 2012

Goodall (2013 – contributing author). Australian Technology – Advance Australia. Ed. John Chadwick. International Mining, August 2013

Presentations

Goodall, W.R. (2012) “Automated mineralogy case studies” MTI Mining Summit, Jakarta, Indonesia

Goodall, W.R. and Perkins, J.P. “Early stage metallurgical evaluation of a complex low-grade uranium project” ALTA Uranium conference, Perth, Australia, May 30-31 2012

Goodall, W.R. and Adams, M.D. ” Early stage risk minimization in process flowsheet design” Recent Advances in Mineral Processing Plant Design, SME, Tucson, Arizona, USA, Oct 2009

Goodall, W.R (2008) “Where is my gold? Gold ore characterisation for exploration and beyond” Gold Exploration, March 2008, Melbourne, Australia

Goodall, W.R. “Automated mineralogy in the prediction of acid rock drainage: Accessible mineralogy using QEMSCAN” SME Meeting 08, Salt Lake City, Utah, USA, February 26-28 2008

Goodall, W.R. and Jaime, P. “Examination of particle bias in QEMSCAN® sample preparation” Automated Mineralogy ’07, Brisbane, Australia, September 1-2 2007

Becker M, Butcher A, Botha P, Cropp A, De Villiers J and Bradshaw D (2007) Development of a Measurement Technique for the Quantitative Determination of Hexagonal and Monoclinic Pyrrhotie: Evaluation Using Examples from the Bushveld Complex Using QEMSCAN®. Automated Mineralogy ’07, 1st – 2nd September, 2007, Brisbane, Australia

Goodall, W.R. “The characterisation of mineralogy and gold deportment for complex tailings deposits using QEMSCAN®” Precious Metals ’07, Brisbane, Australia, August 30-31 2007

Butcher A, Benedictus A, Cropp A and Gottlieb P (2007) Improving Process Efficiencies by Linking Macro-, Meso-, and Micro-Features Obtained from Automated Mineralogical Techniques. SME’07, Denver, Colorado, Feb 26 – 28, 2007

The University of Melbourne Engineering Deans Honors awards 2007, Keynote address

Cropp A (2006) Automated Mineralogy and Petrology. 11th International Conference on Experimental Mineralogy, Petrology and Geochemistry, September 11th-13th, 2006, Bristol, United Kingdom

Goodall, W.R. and Scales, P.J. “Automated mineralogy in the gold mining industry: a review” Automated Mineralogy ’06, Brisbane, Australia, July 17-18 2006

Goodall, W.R., Butcher, A.R. and Scales, P.J. “Applications of QEMSCAN in characterisation of gold occurrences in tailing material: a case study” Automated Mineralogy ’06, Brisbane, Australia, July 17-18 2006

Butcher A, Gottlieb P, Cropp A, Helms T, Tracey C, Ross B and Valery W (2005) Quantitative Mineralogical Data – Continuing to Make a Difference to the Bottom Line by Improving Process Integration and Optimisation – From First Drill Hole to Final Dross. Randol Innovative Metallurgical Forum, Perth, Australia, 2005

Cropp A, Gottlieb P and Barnes M (2005) The Image Grid Classification of SEM Based Images Based on Their Properties. AMAS VIII, February, 2005

Goodall, W.R. Scales, P.J. and Butcher, A.R. “The use of QEMSCAN and diagnostic leaching and PIXE in the characterization of gold in complex ores” Precious Metals, Cape Town South Africa, November 10-12 2004

Goodall, W.R. Leatham, J.D. and Scales, P.J. “A new method of determination of preg-robbing in gold ores” JKMRC International Student Conference, Brisbane Australia, September 6-7 2004

Goodall, W.R. and Scales, P.J. “The Characterisation of Gold in Complex Ores using QEMSCAN and micro-PIXE” 24th Australian Colloid & Surface Chemistry Student Conference, Adelaide, Australia, February 2004

Butcher A, French D, Cropp A, Gottlieb P, Wall T and Gupta R (2004) A New Tool for the Characterisation for Coal and Mineral Matter – QEMSCAN®. 21st Annual Meeting of the Society for Organic Petrology: Organic Matter Down Under, September, 2004, Sydney, Australia

French D, Butcher AR, Cropp A, Gottlieb P, Wall T and Gupta R (2004) QEMSCAN – A New Tool For The Characterisation of Coal and Mineral Matter. The Society of Organic Petrology Meeting, Sydney, September 2004

Butcher AR, Cropp A, French D and Gottlieb P (2004) Introducing A New Coal Analysis Capability. 10th South African Conference On Coal Science and Technology, Johannesburg, South Africa

Goodall, W.R. Scales, P.J. and Ryan C.G. “Gold in the Pilbara: Associations and Extractability” Applied Mineralogy, Helsinki Finland, March 17-18 2003

Cropp A, Butcher AR, French D, Gottlieb P, O’Brien G and Pirrie D (2003) Automated Measurement of Coal and Mineral Matter By QEMSCAN – A New Mineralogical Tool Based On QEM SEM Technology. Applied Mineralogy ’03, Helsinki, Finland, March

Goodall, W.R. and Scales, P.J. “The Extraction of Gold from Low-Grade Ores” 23rd Australian Colloid & Surface Chemistry Student Conference, Albury, Australia, November 2002

Patents

Goodall, W.R. Scales, P.J. and G.C. Morgan (2005) “Hydrometallurgical Leaching Process” Provisional

  • ENQUIRE NOW

    • This field is for validation purposes and should be left unchanged.

    THANKS FOR YOUR REQUEST

    • You are requesting:

      *Name of Paper gets inserted here*

      OK, we just need some basic information so that we can get back to you.

    • This field is for validation purposes and should be left unchanged.